TROUBLE
|
PROBABLE CAUSE
|
RECOMMENDED REMEDY
|
| (1) Conveyor appears inoperative; operating
controls not functioning ng properly. |
a. Circuit breaker on Master Control Panel
not "ON". |
Place Master Control circuit breaker to
"ON" position. |
| |
b. Power not applied to Master Control
Panel from Dock Power Source. |
Check source input voltage to Loading
conveyor. |
| (2) Circuit breaker on Master Control
Panel. will not stay "ON" breaker constantly "trips". |
Short circuit in electrical system. |
Isolate short circuit and repair electrical
system. |
